COBI Dodge Ram 1500 Sheriff Truck #24658: Build and Display
By COBI Bricks: Building Blocks For Kids, Construction Block | Published: 2026-10-16
Category: How-to Guides
A practical build and display guide for the COBI Dodge Ram 1500 Sheriff Truck #24658, with ordered steps, common mistakes, and shelf-ready display tips for Action Town collectors.
Quick answer
Build the COBI Dodge Ram 1500 Sheriff Truck #24658 in one sitting by sorting the bag, assembling the chassis and cab before the light bar and decals, and pressing each element fully onto the studs. Keep the finished model on a dust-free shelf away from direct sun so the sheriff livery and printed parts stay sharp.
Before you start: sort the elements and clear your build space
Open the box and tip all the elements into a shallow tray or a clean, flat surface. The sheriff truck uses small printed details and body panels, so a light-colored tray makes dark parts easier to spot. Keep the instruction booklet flat and open at the first page rather than folding it back, because creased pages make it harder to check part orientation on later steps. Work on a table with enough room to set the growing model aside without knocking it over.
- Sort by size first, then by color, so you are not hunting for one small element mid-step.
- Keep a small dish for tiny parts that roll easily, such as lights and mirror pieces.
- Check that no elements are still inside the bag corners before you start.
Build the chassis and cab in order
Follow the booklet sequence rather than jumping ahead to the body panels. The chassis gives the truck its shape, and the cab sits on top of that base, so building out of order usually means pulling parts apart later. Press each element down until you feel it seat on the studs; a partly seated part can look fine at first but will loosen when you attach the next layer. If a step feels tight, check the orientation of the element instead of forcing it, because reversing a part is the most common cause of a stubborn connection.
Add the light bar, wheels and finishing details last
Attach the roof light bar and wheels after the main body is solid, so you are not gripping a fragile model while pressing parts into place. Set the truck on its wheels only when the underside is complete, and roll it gently on a smooth surface to check that all four wheels sit evenly. Printed elements and decals go on near the end; align them before pressing down, because repositioning a printed part can dull the print. If you plan to display the truck alongside other Action Town models, leave the light bar until after you have moved the model to its shelf spot.
Build steps
- Sort and check the elements: Empty the box onto a light tray and confirm you have the printed parts and small details before starting. Checkpoint: if anything looks missing, check the bag corners and the tray edge before moving on.
- Build the chassis first: Follow the booklet from the base upward and press each element fully onto the studs. Common mistake: skipping ahead to the cab, which makes the base harder to align later.
- Assemble the cab and body panels: Attach the cab to the completed chassis, then add the side panels in the order shown. Checkpoint: the cab should sit flush with no gap along the chassis line.
- Fit the wheels and light bar: Add the wheels once the body is solid, then attach the roof light bar last. Common mistake: pressing the light bar on while gripping the model, which can loosen body panels.
- Apply printed details and decals: Align each printed element before pressing it down, and avoid repositioning once it touches the surface. Checkpoint: step back and view the truck from the front to confirm the livery sits straight.
- Move to a dust-free display spot: Place the truck on a shelf out of direct sunlight and away from high-traffic areas. Next step: dust with a soft brush rather than a cloth to protect printed parts.
Product facts
- COBI DODGE Ram 1500 Sheriff Truck: Set #24658: The RAM 1500 HEMI Sheriff is a collector's edition pickup in sheriff's colors, described as a symbol of law, strength and authority. The livery is the centerpiece, so handle the model by the chassis and avoid touching printed areas while building.
- COBI DODGE Ram 3500 Wrecker Tow Truck: Set #24611: The RAM 3500 Wrecker Tow Truck is a 1:35 scale model with 295 elements, rubber tires and rotating features. If you want a second Action Town truck with more moving play features, the wrecker adds a different building experience.
- COBI DODGE Ram 3500 Dump Truck: Set #24659: The RAM 3500 Dump Truck is inspired by real machines that work on construction sites and in quarries. It pairs naturally with the sheriff truck for a themed display of working vehicles rather than a single-model shelf.
